ta78ds05,06,08,09,10,12,15bp,05cp 2001-08-08 1 toshiba bipolar linear integrated circuit silicon monolithic ta78ds05bp,ta78ds06bp,ta78ds08bp,ta78ds09bp, ta78ds10bp,ta78ds12bp,ta78ds15bp,TA78DS05CP 5 v, 6 v, 8 v, 9 v, 10 v, 12 v, 15 v low dropout voltage regulator the ta78dsbp series consists of positive fixed output voltage regulator ic capable of sourcing current up to 30 ma. due to the features of low dropout voltage and low standby current, these devices are useful for battery powered equipment. this series includes current limiting, thermal shutdown, over voltage protection, input fault protection and excessive transient protection circuits internally. features low standby current of 600 a typical. maximum output current up to 30 ma. low dropout voltage of less than 0.3 v. multi-protection: reverse connection of power supply, 60v load dump, thermal shut down and current limiting. available in the plastic to-92 mod package. pin assignment out 2 3 gnd in marking side 1 block diagram weight: 0.36 g (typ.)
ta78ds05,06,08,09,10,12,15bp,05cp 2001-08-08 2 maximum ratings (ta = 25c) characteristics symbol rating unit operating input voltage v in 29 v input voltage of surge v in 60 v power dissipation (ta = 25c) p d 800 mw operating temperature t opr ? 40~85 c storage temperature t stg ? 55~150 c junction temperature t j 150 c thermal resistance r th (j-a) 156 c/w soldering temperaturetime t sol 260 (10 s) c ta78ds05bp electrical characteristics (unless otherwise specified, v in = 14 v, i out = 5 ma, c in = 0.1 f, c out = 3.3 f, t j = 25c) characteristics symbol test circuit test condition min typ. max unit 5.35 v v in 26 v 4.75 5.0 5.25 output voltage v out D 5.35 v v in 26 v, ? 40c ta 85c 4.5 5.0 5.5 v 9.0 v v in 16 v D 1 10 line regulation regline D 6.0 v v in 26 v D 4 30 mv load regulation regload D 5.0 ma i out 30 ma D 1 50 mv i out = 0 ma D 0.6 1 quiescent current i b D 6 v v in 26 v, i out = 5 ma D 0.7 1 ma i out = 5 ma D 0.1 0.2 dropout voltage v d D i out = 10 ma D 0.2 0.3 v max operating voltage v in D D 29 33 D v TA78DS05CP electrical characteristics (unless otherwise specified, v in = 14 v, i out = 5 ma, c in = 0.1 f, c out = 3.3 f, t j = 25c) characteristics symbol test circuit test condition min typ. max unit 5.35 v v in 26 v 4.8 5.0 5.2 output voltage v out D 5.35 v v in 26 v, ? 40c ta 85c 4.75 5.0 5.25 v 9.0 v v in 16 v D 1 10 line regulation regline D 6.0 v v in 26 v D 4 30 mv load regulation regload D 5.0 ma i out 30 ma D 1 50 mv i out = 0 ma D 0.6 1 quiescent current i b D 6 v v in 26 v, i out = 5 ma D 0.7 1 ma i out = 5 ma D 0.1 0.2 dropout voltage v d D i out = 10 ma D 0.2 0.3 v max operating voltage v in D D 29 33 D v
ta78ds05,06,08,09,10,12,15bp,05cp 2001-08-08 3 ta78ds06bp electrical characteristics (unless otherwise specified, v in = 14 v, i out = 5 ma, c in = 0.1 f, c out = 3.3 f, t j = 25c) characteristics symbol test circuit test condition min typ. max unit 6.35 v v in 26 v 5.7 6.0 6.3 output voltage v out D 6.35 v v in 26 v, ? 40c ta 85c 5.4 6.0 6.6 v 10 v v in 17 v D 1 20 line regulation regline D 7.0 v v in 26 v D 4 40 mv load regulation regload D 5.0 ma i out 30 ma D 1 60 mv i out = 0 ma D 0.6 1.1 quiescent current i b D 7 v v in 26 v, i out = 5 ma D 0.7 1.1 ma i out = 5 ma D 0.1 0.2 dropout voltage v d D i out = 10 ma D 0.2 0.3 v max operating voltage v in D D 29 33 D v ta78ds08bp electrical characteristics (unless otherwise specified, v in = 14 v, i out = 5 ma, c in = 0.1 f, c out = 3.3 f, t j = 25c) characteristics symbol test circuit test condition min typ. max unit 8.35 v v in 26 v 7.6 8.0 8.4 output voltage v out D 8.35 v v in 26 v, ? 40c ta 85c 7.2 8.0 8.8 v 12 v v in 19 v D 2 30 line regulation regline D 9.0 v v in 26 v D 5 60 mv load regulation regload D 5.0 ma i out 30 ma D 4 80 mv i out = 0 ma D 0.7 1.2 quiescent current i b D 9 v v in 26 v, i out = 5 ma D 0.8 1.2 ma i out = 5 ma D 0.1 0.2 dropout voltage v d D i out = 10 ma D 0.2 0.3 v max operating voltage v in D D 29 33 D v
ta78ds05,06,08,09,10,12,15bp,05cp 2001-08-08 4 ta78ds09bp electrical characteristics (unless otherwise specified, v in = 14 v, i out = 5 ma, c in = 0.1 f, c out = 3.3 f, t j = 25c) characteristics symbol test circuit test condition min typ. max unit 9.35 v v in 26 v 8.55 9.0 9.45 output voltage v out D 9.35 v v in 26 v, ? 40c ta 85c 8.1 9.0 9.9 v 13 v v in 20 v D 2 35 line regulation regline D 10 v v in 26 v D 5 70 mv load regulation regload D 5.0 ma i out 30 ma D 4 90 mv i out = 0 ma D 0.7 1.3 quiescent current i b D 10 v v in 26 v, i out = 5 ma D 0.8 1.3 ma i out = 5 ma D 0.1 0.2 dropout voltage v d D i out = 10 ma D 0.2 0.3 v max operating voltage v in D D 29 33 D v ta78ds10bp electrical characteristics (unless otherwise specified, v in = 14 v, i out = 5 ma, c in = 0.1 f, c out = 3.3 f, t j = 25c) characteristics symbol test circuit test condition min typ. max unit 10.35 v v in 26 v 9.5 10.0 10.5 output voltage v out D 10.35 v v in 26 v, ? 40c ta 85c 9.0 10.0 11.0 v 14 v v in 21 v D 3 40 line regulation regline D 11 v v in 26 v D 7 80 mv load regulation regload D 5.0 ma i out 30 ma D 6 100 mv i out = 0 ma D 0.7 1.4 quiescent current i b D 11 v v in 26 v, i out = 5 ma D 0.8 1.4 ma i out = 5 ma D 0.1 0.2 dropout voltage v d D i out = 10 ma D 0.2 0.3 v max operating voltage v in D D 29 33 D v
ta78ds05,06,08,09,10,12,15bp,05cp 2001-08-08 5 ta78ds12bp electrical characteristics (unless otherwise specified, v in = 18 v, i out = 5 ma, c in = 0.1 f, c out = 3.3 f, t j = 25c) characteristics symbol test circuit test condition min typ. max unit 12.35 v v in 26 v 11.4 12.0 12.6 output voltage v out D 12.35 v v in 26 v, ? 40c ta 85c 10.8 12.0 13.2 v 16 v v in 23 v D 4 50 line regulation regline D 13 v v in 26 v D 8 100 mv load regulation regload D 5.0 ma i out 30 ma D 2 120 mv i out = 0 ma D 0.8 1.5 quiescent current i b D 13 v v in 26 v, i out = 5 ma D 1.0 1.5 ma i out = 5 ma D 0.1 0.2 dropout voltage v d D i out = 10 ma D 0.2 0.3 v max operating voltage v in D D 29 33 D v ta78ds15bp electrical characteristics (unless otherwise specified, v in = 20 v, i out = 5 ma, c in = 0.1 f, c out = 3.3 f, t j = 25c) characteristics symbol test circuit test condition min typ. max unit 15.35 v v in 26 v 14.25 15.0 15.75 output voltage v out D 15.35 v v in 26 v, ? 40c ta 85c 13.5 15.0 16.5 v 19 v v in 26 v D 5 60 line regulation regline D 16 v v in 26 v D 8 130 mv load regulation regload D 5.0 ma i out 30 ma D 1 150 mv i out = 0 ma D 1.0 1.6 quiescent current i b D 16 v v in 26 v, i out = 5 ma D 1.2 1.6 ma i out = 5 ma D 0.1 0.2 dropout voltage v d D i out = 10 ma D 0.2 0.3 v max operating voltage v in D D 29 33 D v
ta78ds05,06,08,09,10,12,15bp,05cp 2001-08-08 6
ta78ds05,06,08,09,10,12,15bp,05cp 2001-08-08 7
ta78ds05,06,08,09,10,12,15bp,05cp 2001-08-08 8 application circuit capacitor c in /c out must be guaranteed to operate of the temperature range that the regulator should be operated correctly, 100 f is a suitable value to suppress the oscillation phenomenon at the output terminal. the equivalent series resistance (esr) of c out must be less than 1 ? in operating temperature range.
ta78ds05,06,08,09,10,12,15bp,05cp 2001-08-08 9 package dimensions
ta78ds05,06,08,09,10,12,15bp,05cp 2001-08-08 10 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. the products described in this document are subject to the foreign exchange and foreign trade laws. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707eb a restrictions on product use
|
